| No. | Descripción | |
|---|
| 1 | Celdas cilíndricas para mediciones polarimétricas, rango UV | |
| 2 | Cubeta para mediciones de turbidez, campo VIS | |
| 3 | Cubetas de flujo con dos vías ópticas, Absorción y Medición de Fluorescencia | |
| 4 | Cubetas para la medición de fluorescencia, rango UV | |
| 5 | Cubetas para la medición de la absorción, rango NIR | |
| 6 | Cubetas para la medición de la adsorción, zona Vis | |
| 7 | Cubetas para mediciones de absorción, mediciones del flujo, rango UV | |
| 8 | Cubetas para mediciones de dispersión de luz, rango UV | |
| 9 | Cubetas para mediciones de la reflexión, campo visible | |
| 10 | Cubetas para mediciones del flujo de fluorescencia, campo UV Tipo macro Espesor de la capa 10 x 10 mm Capacidad 3300 µl D | |
| 11 | Cubetas para mediciones del flujo de fluorescencia, campo UV Tipo semi-micro Espesor de la capa 3 x 3 mm Capacidad 100 µl | |
| 12 | Cubetas para medir la absorción, margen UV | |
| 13 | Célula de medición micro TrayCell | |
| 14 | Estándares secundarios para calibrar espectrofotómetros | |
| 15 | Estándares secundarios para calibrar espectrofotómetros | |
| 16 | Estándares secundarios para calibrar espectrofotómetros | |
| 17 | HELLMANEX® III líquido | |
| 18 | Macro cubetas para la medición de la absorción, rango UV, vidrio de cuarzo High Performance | |
| 19 | Macro cubetas para la medición de la absorción, rango VIS, vidrio óptico especial | |
| 20 | Macro cubetas para medición de absorción, rango NIR, vidrio de cuarzo Extended Range | |
| 21 | Materiales de referencia certificados para la cualificación del espectrofotómetro como equipo completo | |
| 22 | Microcélula de medición TrayCell 2.0 | |
| 23 | Microplacas de cuarzo | |
| 24 | Piezas ópticas para el rango UV y NIR | |
| 25 | Soporte para cubetas para la medición de la fluorescencia | |
| 26 | Soporte para cubetas para mediciones de absorción | |
| 27 | Standards secundarios para la calibración de espectrofotómetros | |
| 28 | Tapa para TrayCell | |
| 29 | Tipo Espesor de la capa 10 x 2,5 mm Capacidad 275 µl Descripción Med. ext.(L x An x Alt) 12,5 x 12,5 x 35 mm anchu | |
| 30 | Ultra microcubetas para la medición de la absorción, rango UV, vidrio de cuarzo High Performance | |
| 31 | [EN]: Adapter for light conductor 15mm centre height for UV-range without light conductor | |
| 32 | [EN]: Big cuvette type 740 | |
| 33 | [EN]: Calibration standard liquid filter 667-UV40, potassium dichromate 40 mg/l | |
| 34 | [EN]: Calibration standard liquid filter 667-UV80, potassium dichromate 80 mg/l | |
| 35 | [EN]: Calibration standard reference filter 667-UV0120, | |
| 36 | [EN]: Calibration standard reference filter 667-UV0200, Potassium dichromate | |
| 37 | [EN]: Calibration standard reference filter 667-UV19, aceton | |
| 38 | [EN]: Calibration standard reference filter 667-UV20, potassium dichromate | |
| 39 | [EN]: Cap for TrayCell micro cell 2.0 SD 2 mm, with quartz glass mirror, for 105.830-UVS | |
| 40 | [EN]: Cleaning holder SAV-a-CELL plastic, for 4 cuvettes with 10mm thickness | |
| 41 | [EN]: Cover of PTFE 10 mm SD pack of 10 ***010-001-10-VE10-72*** | |
| 42 | [EN]: Cuvette 101-QS, 10x10 mm thickness quartz glass ***spectrally measured*** | |
| 43 | [EN]: Cuvette 105-QS, 10mm thickness quartz glass | |
| 44 | [EN]: Cuvette 117.200-QS, 10mm thickness | |
| 45 | [EN]: Cuvette 117.200F-QS, 10x10mm thickness 3500µl | |
| 46 | [EN]: Cuvette 124-QS, 0.1mm thickness quartz glass SUPRASIL® with detachable windows | |
| 47 | [EN]: Cuvette 124-QS, 0.2mm thickness quartz glass SUPRASIL® with detachable windows | |
| 48 | [EN]: Cuvette 124-QS, 0.5mm thickness quartz glass SUPRASIL® with detachable windows | |
| 49 | [EN]: Cuvette 165-QS 10 mm thickness, optical special glass | |
| 50 | [EN]: Cuvette 238-QS, 2 x 4,375 mm thickness 3 windows, for absorption-measurings | |
| 51 | [EN]: Cuvette 700.000-OG, 10mm thickness optical special glass | |
| 52 | [EN]: Cuvette 700.000-OG, 20mm thickness optical special glass 53 x 55 x 25 mm | |
| 53 | [EN]: Cuvette 700.010-OG, 20mm thickness optical special glass, 56000 µl | |
| 54 | [EN]: Cuvette 700.015-OG 28 mm thickness | |
| 55 | [EN]: Cuvette 700.016-OG 18 mm thickness | |
| 56 | [EN]: Cuvette 700.061-OG 50 mm thickness | |
| 57 | [EN]: Cuvette distance owner 5 mm aluminium, 38 x 12.5 x 5 mm for cuvettes with 5 mm thickness | |
| 58 | [EN]: Cuvette distance owner 8 mm aluminium, 38 x 12.5 x 8 mm for cuvettes with 2 mm thickness | |
| 59 | [EN]: Cuvette distance owner 9 mm aluminium, 38 x 12.5 x 9 mm for cuvettes with 1 mm thickness | |
| 60 | [EN]: Cuvette holder without light conductor 1-20 mm, Z8.5/15 | |
| 61 | [EN]: Cuvette, 10mm thickness | |
| 62 | [EN]: Cylinder cell 692.455-BF according to ISO 17223 | |
| 63 | [EN]: Cylinder-cuvette 120-QS, 20mm thickness quartz glass SUPRASIL®, macro with PTFE-stopper 011.002 | |
| 64 | [EN]: Cylinder-cuvette 120-QS, 2mm coat thickness quartz glass SUPRASIL®, macro, with PTFE-stopper 011.001 | |
| 65 | [EN]: Cylinder-cuvette 120-QS, 5mm thickness quartz glass SUPRASIL®, macro with PTFE-stopper 011.001 | |
| 66 | [EN]: Cylinder-cuvette 120-QX, 10mm thickness quartz glass SUPRASIL® 300, macro with PTFE-stopper 011.002 | |
| 67 | [EN]: Cylinder-cuvette 121.000-QS, 0,2mm thickness quartz glass SUPRASIL®, macro with PTFE-stoppers | |
| 68 | [EN]: Dye-Laser cuvette 111.070-QS, 10x10mm thickness Quartz glass SUPRASIL®, 3500 µl with PTFE-stopper | |
| 69 | [EN]: Factory certificate 2.2 according to EN 10204 Coating thickness tolerance according to EP 10 with certificate FO-QUA-365. | |
| 70 | [EN]: FEP replacement tubing 500 mm long with screw cap short for circulatory cuvette | |
| 71 | [EN]: Fiber optic cable 2 mtr. | |
| 72 | [EN]: Filter holder F0 | |
| 73 | [EN]: Flow-through cuvette 137-QS, 2mm thickness quartz glass SUPRASIL®, 520 µl | |
| 74 | [EN]: Flow-through cuvette 178.710-QS, 50mm thickness 15mm centre height, quartz glass SUPRASIL®, 80 µl, 2 screw conn | |
| 75 | [EN]: Flow-through cuvette 178.712-QS, 10mm CH 8.5mm, quartz glass SUPRASIL® | |
| 76 | [EN]: Flow-through cuvette 5 mm thickness quartz glass SUPRASIL® | |
| 77 | [EN]: Glass filter F201 | |
| 78 | [EN]: Glass Filter F202 | |
| 79 | [EN]: Glass filter F203 | |
| 80 | [EN]: Glass Filter F204 | |
| 81 | [EN]: Glass Filter Set 666-S002 | |
| 82 | [EN]: Glass filter set 666-S300, cons.of: # 666-F301, 666-F303 und 666-F390 | |
| 83 | [EN]: Glass filter type 666-F390 | |
| 84 | [EN]: Half-micro-cuvette 104-QS, 10mm thickness quartz glass SUPRASIL® 1400 µl with PTFE cover ***spectrally measured | |
| 85 | [EN]: Half-Micro-cuvette 104-QS, 5mm thickness quartz glass SUPRASIL®, 700 µl with cover of PTFE | |
| 86 | [EN]: Half-micro-cuvette 104-QX, 10mm thickness quartz glass SUPRASIL® 300, 1400 µl with cover of PTFE | |
| 87 | [EN]: Lab All Quartz Excalibur UV 1mm, outside 15mm, -180 °C to 150 °C, vacuum connection | |
| 88 | [EN]: Liquid calibration standard 667-UV400 667-UV5 + 667-UV14 perchloride acid | |
| 89 | [EN]: Liquid calibration standard Set 667-UV101 | |
| 90 | [EN]: Liquid calibration standard Set 667-UV102 | |
| 91 | [EN]: Liquid calibration standard Set 667-UV103 | |
| 92 | [EN]: Liquid calibration standard Set 667-UV304 667-UV600 potassium dichromate in perchloride acid 667-UV14 perchloride acid | |
| 93 | [EN]: Liquid calibration standard Set 667-UV60 667-UV14 perchloric-filter | |
| 94 | [EN]: Liquid filter 667-UV5USP certified | |
| 95 | [EN]: Liquid Filter Set EP1002 UV | |
| 96 | [EN]: Liquid Filter Set S501 | |
| 97 | [EN]: Liquid Filter Set UV307 | |
| 98 | [EN]: Liquid filter type 667-UV0140 Potassium dichromate 140 mg/l in HClO4 in storage box with DAkkS calibration certificate | |
| 99 | [EN]: Liquid filter UV25USP | |
| 100 | [EN]: Liquid filter UV506 Calibration standard | |
| 101 | [EN]: Liquid Filter UV512 Calibration standard | |
| 102 | [EN]: Liquid Filter UV518 Calibration standard | |
| 103 | [EN]: Liquid Filter UV524 Calibration standard | |
| 104 | [EN]: Liquid Filter UV536 Calibration standard | |
| 105 | [EN]: Liquid Filter UV599 Calibration standard | |
| 106 | [EN]: Liquid-Filter-Set EP1001 UV/Vis | |
| 107 | [EN]: Liquid-Filter-Set UV100H incl.UV1 stray ligth-filter SD10mm,UV1H reference filter SD5mm, 200nm cut-off, w.DAkkS certifica | |
| 108 | [EN]: Macro cuvette 117.100F-QS, 10x10mm path length high performance quartz glass (QS), 3500 ul 1 pair | |
| 109 | [EN]: Macro-cuvette 100-QX, 100mm thickness quartz glass, 35000 µl with cover of PTFE | |
| 110 | [EN]: Macro-cuvette 109.000-QS, 10 mm thickness quartz glass SUPRASIL®, 3500 µl with cover of PTFE | |
| 111 | [EN]: Macro-cuvette 109.000F-QS, 10x10mm quartz glass SUPRASIL®, 3500 µl with cover of PTFE | |
| 112 | [EN]: Macro-cuvette 110-QS, 100mm thickness quartz glass SUPRASIL®, 35000 µl with 2 PTFE-stoppers | |
| 113 | [EN]: Macro-cuvette 111-QS, 10x10mm thickness quartz glass SUPRASIL®, 3500 µl with PTFE-stopper 011.002 ***spectrally | |
| 114 | [EN]: Macro-cuvette 402.000, 10mm thickness optical glass, 4500 µl with cover of PTFE | |
| 115 | [EN]: Macro-cuvette 6030-UV, 10mm thickness quartz glass HERASIL®, 3500 µl, without cover ***spectrally measured*** | |
| 116 | [EN]: Magnetic stirring bars dia.: 3-4mm pack of 10 | |
| 117 | [EN]: Neutral density glass filter type 666-F303 certified | |
| 118 | [EN]: NIR Standard fiber optic cable Wavelength range 400nm - 2300nm NIR, length 3m Fibre optic connection FSMA type905 and col | |
| 119 | [EN]: open screw cap with ISO GL 14 thread and silicone seal, pack of 10 | |
| 120 | [EN]: Pelicase with Inlay for 5 Filters | |
| 121 | [EN]: Plastic case 244 for 1 - 4 cuvettes 1-10 mm (inner life variable) with fold-cover or stopper | |
| 122 | [EN]: Polypropylene cuvette holder for 16 cuvettes with 10mm thickness | |
| 123 | [EN]: PTFE hose set type 040.111 For compact cuvettes and 3in1 cuvettes; 500mm long, AD 1.6mm, ID 1.0mm | |
| 124 | [EN]: PTFE lid 20mm | |
| 125 | [EN]: PTFE replacement tubing 500 mm long long screw-connection, OD 1,6 mm ID 1,0 mm | |
| 126 | [EN]: PTFE stopper 011.001 NS 5, for cuvettes pack of 5 | |
| 127 | [EN]: PTFE-stopper 011.002 NS 7, for cuvettes pack of 5 | |
| 128 | [EN]: PTFE-stopper 011.101 6 mm | |
| 129 | [EN]: PTFE-stopper 011.102 for cuvettes 121.000-QS | |
| 130 | [EN]: Re-certification glass filter F3 with DAkkS calibration certificate | |
| 131 | [EN]: Recertification Glass filter F1 with DAkkS certification Please send the filter to us. | |
| 132 | [EN]: Recertification glass filter set 666S006 Please send the filter to us. | |
| 133 | [EN]: Recertification Liquid filter set 667-UV100 incl.667-UV1 aqueous potassium chloride solution, 667-UV12 purifed water | |
| 134 | [EN]: Recertification Liquid Filter UV5 | |
| 135 | [EN]: Recertification Liquid Filter UV60 | |
| 136 | [EN]: Recertification Liquide filter set UV301 of a calibration standard kit Please send the filter to us. | |
| 137 | [EN]: Recertification Liquide filter set UV304 of a calibration standard kit | |
| 138 | [EN]: Recertification Liquide filter set UV305 consisting of: UV60+UV600 absorption filter, UV reference filter | |
| 139 | [EN]: Reference material for checking for stray light reference filter 667-UV11, 385nm cut-off, with DAkkS calibration certific | |
| 140 | [EN]: Reference plate for microplate reader aluminium frame with 5 neutral glas strips and one reference range | |
| 141 | [EN]: Reference plate for microplate readers Checking photometric&wavelength accuracy neutral glass strips and a reference rang | |
| 142 | [EN]: Screw cap, closed with ISO thread GL 14 pack of 10 | |
| 143 | [EN]: Secondary standard kit 666-S000 refill, cons.of: greyglass standards 0,25, 0,5, 1,0 A, holmium oxide glass standard and | |
| 144 | [EN]: Semi-micro cell 117.204-QS PL 10x4mm SD 10x4mm, VOL 1400µl | |
| 145 | [EN]: Semi-micro cell 117.204F-QS PL 10x4mm SD 10x4mm, VOL 1400µl | |
| 146 | [EN]: Silicone gasket PTFE coated pack of 10 | |
| 147 | [EN]: Silicone rubber (septum) pack of 10 | |
| 148 | [EN]: Spare part FEP tube length: 500mm with one long screw connection | |
| 149 | [EN]: Spare part PTFE tube 500 mm long short screw sonnections OD 1.6 mm ID 1.0 mm | |
| 150 | [EN]: Spring clamp 1mm | |
